Inside the restoration: A rare Beetle gets a second chance in emotional VolksMagic project
This series follows the restoration of a rare Volkswagen Beetle by the team at VolksMagic
The surprise reunion between a widow and her late husband's cherished Volkswagen Beetle has captured hearts after a painstaking restoration brought the classic car back to life in his memory.
But the restoration project might never have happened if the car had been scrapped for parts in Oldbury as was on the cards.
In this series we will look at the different stages of the project, the problems the team encountered and the work required to return the car to its original condition.
The story begins on March 19, when a discovery at the workshop changed the direction of the project.


The car had arrived at VolksMagic in Oldbury as a potential parts car donated by Jan Clay, the widow of former owner Joe who passed away while attempting to restore the car to its former glory.
But further checks revealed it was not simply a Volkswagen 1303 but a 1303 S – a much rarer model.


The discovery meant the car was no longer destined to be used for parts. Instead, the team decided to restore it to its original specification, which meant there was another key detail to address. The Beetle had arrived painted orange, but it should have been gold.
Volksmagic’s Lee Southerton said the aim was to get the car looking “factory fresh and back how it rolled out of Volkswagen,” and with just nine and a half weeks to go until the planned handover back to Jan, work began immediately.
The first jobs included correcting the door gaps. The door posts had been fitted too far back, which meant there was not enough room to fit the door rubber while allowing the door to close properly.
It was only a matter of a few millimetres, but correcting it required careful work from VolksMagic colleague Dave, who moved the frame into the correct position.


Normally, the workshop would complete the metalwork before moving on to the bodywork and then paint. This time, the timetable did not allow for that approach, and work was taking place on different areas of the car at the same time.
Metalwork was being carried out inside the Beetle, while preparation work was also under way around what would eventually become the bonnet.
The priority was to keep the restoration moving while making sure the work was done properly.


The discovery of the 1303 S had changed the project's purpose. What had been donated as a parts car was now being given a chance to return to the road in the condition it was originally intended to be in.
And with the clock already ticking, there was plenty more work to come.
The restoration will eventually lead to V-Dubs in the Valley in Bridgnorth in September, where the completed Beetle will be auctioned off to raise money for the Santa’s A Gangsta initiative.
But on March 19, the focus was on getting the foundations right – and making sure this rare 1303 S was going to look like a Volkswagen again.
Stay tuned for part two of the restoration series, when the bodywork and the chassis are separated
Comment Guidelines
Iconic Media encourages reader discussion on our stories. User feedback, insights and back-and-forth exchanges add a rich layer of context to reporting. Please review our Community Guidelines before commenting.